Performance Properties
| Sr. No. | Properties | Testing Standards | Measurement Unit | Typical Values | ||
| Mechanical Properties | ||||||
| 1 | Peel strength: 20 min @24°C | FTM 01 | kg/in | > 0.8 kg/ inch | ||
| 2 | Peel strength: 72 Hrs @24°C | FTM 01 | kg/in | > 1.2 kg/ inch | ||
| 3 | Gloss at 60° | ASTM D-2457 | GU | > 85 | ||
| 4 | Tensile Strength | ASTM D-882 | Mpa | >15 | ||
| 5 | Elongation | ASTM D-882 | % | >250 | ||
| Aging Performance | ||||||
| 6 | Heat ageing 80° C/ 24 Hrs | Internal | – | Pass- No Detrimental Effect | ||
| 7 | Water immersion 40°C/ 24 Hrs | Internal | – | Pass- No Detrimental Effect | ||
| Stain Resistance | ||||||
| 8 | Water and soap resistance Drop test for 10 min | Internal | – | Pass- No Detrimental Effect | ||
| 9 | Battery acid Drop test for 10 min | Internal | – | Pass- No Detrimental Effect | ||
| 10 | Diesel Drop test for 10 min | Internal | – | Pass- No Detrimental Effect | ||
| 11 | SAE Motor oil Drop test for 10 min | Internal | – | Pass- No Detrimental Effect | ||
| 12 | Hydraulic oil Drop test for 10 min | Internal | – | Pass- No Detrimental Effect | ||
Recommended vehicles surface and ambient air temperature should be between 20°C to 30°C. Application should be done in a dust free area and away from direct sunlight.
The Shelf life of this film is one year when stored in its original packaging at the temperature ranging from 18 to 26 ° C and Relative Humidity 50 to 60 %.
